Thank you. The AVC definitely specifies 90000 fps. The stream was encoded by x264.exe, which I don't know enough about to know why it got coded that way. Apparently, you are not the first to run into this: https://www.google.com/search?q=x264+strange+frame+rate+90000&rlz=1C1GIVA_enUS951US951&ei=e1qO...

Demux the video and then open the demuxed video in MediaInfo.

Please post a link to a sample if you doubt there is actually a mismatch. I doubt there is a bug as I have tested things extensively. Non-CLI mode will continue to ask if you have Prompt set. In CLI mode if it is Prompt it will use the container frame rate. Set Prompt (ResponseOnFPSMismatch=0) and y...

Please re-download 243 and try again. For CLI mode, if in the INI file ResponseOnFPSMismatch=0 (prompt) or 2 (use container rate) then the container rate will be used when there is a mismatch. If ResponseOnFPSMismatch=1 then the ES frame rate will be used when there is a mismatch. You can set this u...

Mediainfo is always using the container rate I suppose. OK, I'll change it so that if there is a mismatch in CLI mode, instead of defaulting to the ES rate, I'll follow the INI file setting. You'd set that to ES or container/prompt. In your case either container or prompt would work. You won't be pr...

The problem is that there is no documented standalone DLL I can link to, and I am not willing to do C# development to make one. I could automatically invoke an exe but the gain is minor and there are much more important things to do.

@dennis

Have you tried it? Is it any good?

@hydra3333

Me too.

Thank you. I will ask admin to look into it.

Released in build 243.

DGDecNV build 243: * Added a container/ES FPS mismatch check and associated setting. :salute: Boulder * Close any open info dialog before doing play/preview/save project. This ensures that the info dialog is updated for any settings changes made while the info dialog was still open. :salute: Rocky *...

OK then, so be it.

"since my C64 broke down"

You made me choke on my acorn!

Ooh, computer withdrawal. I feel for you. Good luck with the renovation.

One question: should I suppress the popup on CLI operation, and if so, use the container or ES frame rate?

Getting close to stability. One more time, please re-download DGMPGDec 2.0.0.7 and update 64-bit DGDecode.dll. The property _AspectRatio was removed. _SARNum/_SARDen were changed to report the "pixel size", aka PAR. The alias D2VSource() was removed so as not to collide with other 3rd-party software.

I'll ask admin to fix it up. Thank you for pointing it out WGZ.

Please test this and advise if it does what you need. It checks for a mismatch on open. There is a new controlling option in settings that lets you choose what to do when a mismatch is detected: Prompt Use ES FPS Use Container FPS Please open DGIndexNV and then close it once before testing to get th...

Released in DGMPGDec 2.0.0.7. Marking resolved.

This may or may not be ported to DGMPEGDec Vapoursynth, and DGDecNV.

One more time, guys. Please re-download DGMPGDec 2.0.0.7 and update 64-bit DGDecode.dll. It now sets _SARNum and _SARDen in addition to _AspectRatio. The FrameProperties.txt file was updated.
real.finder

Please re-download DGMPGDec 2.0.0.7 and update 64-bit DGDecode.dll. It was erroneously setting _ChromaLocation to 0 for MPEG1 when it should be 1.
Asd-g

That's all fine with me.

An active solution with pre-amp would be sweet. Use low-noise op-amps. Excited to see your results!

Jolly good.

Sherman, can you please add the aux input and speaker jack to radio 1 also? That's great stuff.

Please re-download DGMPGDec 2.0.0.7. On the website page I had changed the string on the link but it actually pointed to 2.0.0.6. real.finder

DGMPGDec 2.0.0.7

* Revamped frame property support in the 64-bit DGDecode.dll, mainly
to implement pulldown-related frame properties. Refer to the included file
FrameProperties.txt for details. real.finder

http://rationalqm.us/dgmpgdec/dgmpgdec2007.zip

That's an interesting idea. Could be a lot of data, especially for HBD. Maybe a string property could be used. I'll look into it for future release. Not for the pending DGMPGDec 2.0.0.7 to be released today.