[RESOLVED] Logo 1.7 will not load in VirtualDub
[RESOLVED] Logo 1.7 will not load in VirtualDub
...simply won't load, the VirtualDub log states the following:
Plugins: Failed to load "C:\Program Files\VirtualDub\plugins\Logo.vdf": Cannot load plugin module "C:\Program Files\VirtualDub\plugins\Logo.vdf": This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.
I did that with VirtualDub and with Logo 1.7. No joy.
Loaded the latest video driver. No joy.
Paused the McAfee AV software. No joy.
Tried autoloading from the plugins dir as well as manually. Still no joy.
It loads and works fine on the office desktop but not on this desktop at home.
I have made every attempt my meager skills allow. Funny enough the PAN filter loads and works.
So, I am doing the same thing over and over and expecting different results, sounds like insanity is not far off eh?
Something is wrong and I can't find what that is. What am I missing (be kind). Could any one please shed some light on all this?
Thanks.
Plugins: Failed to load "C:\Program Files\VirtualDub\plugins\Logo.vdf": Cannot load plugin module "C:\Program Files\VirtualDub\plugins\Logo.vdf": This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.
I did that with VirtualDub and with Logo 1.7. No joy.
Loaded the latest video driver. No joy.
Paused the McAfee AV software. No joy.
Tried autoloading from the plugins dir as well as manually. Still no joy.
It loads and works fine on the office desktop but not on this desktop at home.
I have made every attempt my meager skills allow. Funny enough the PAN filter loads and works.
So, I am doing the same thing over and over and expecting different results, sounds like insanity is not far off eh?
Something is wrong and I can't find what that is. What am I missing (be kind). Could any one please shed some light on all this?
Thanks.
Re: Logo 1.7
State full machine and OS specs. Also state VirtualDub version.
Re: Logo 1.7
Hi, thanks for the quick reply,
this is right off the System Properties General screens:
System:
Microsoft Windows XP
Home Edition
Version 2002
Service Pack 3 (5.1.2600)
machine:
Dell Inspiron 530s
Intel Pentium Dual CPU
E2140 @ 1.60 GHz
1.60 GHz, 0.99GB of RAM
Physical Address Extension
250 GB HDD of which 44GB is free
Display Adapter:
Intel G33/G31 Express Chipset Family
DirectX Version: 9.0
Physical Memory: 1013 MB
Minimum Graphics Memory: 8MB
Maximum Graphics Memory: 128MB
Graphics Memory in Use: 7MB
Driver Version: 6.14.10.4820
Video BIOS: 1471
Current Graphics Mode: 1024 by 768 High Color (75Hz)
Devices Connected to the Graphics Accelerator:
Active Monitors: 1
Monitor Name: Plug and Play Monitor
Display Type: Analog
Gamma Value: 2.20
DDC2 Protocol: Supported
Maximum Image Size: Hor 14.0 inches, Ver 10.0 inches
VirtualDub 1.9.11
Build 32842/release(Fri Dec 24 13:18:44 2010)
Please note from my initial post that the pan (1.0 beta 2) filter from Donald Graft (you I believe) loads fine if that means anything.
Thanks.
this is right off the System Properties General screens:
System:
Microsoft Windows XP
Home Edition
Version 2002
Service Pack 3 (5.1.2600)
machine:
Dell Inspiron 530s
Intel Pentium Dual CPU
E2140 @ 1.60 GHz
1.60 GHz, 0.99GB of RAM
Physical Address Extension
250 GB HDD of which 44GB is free
Display Adapter:
Intel G33/G31 Express Chipset Family
DirectX Version: 9.0
Physical Memory: 1013 MB
Minimum Graphics Memory: 8MB
Maximum Graphics Memory: 128MB
Graphics Memory in Use: 7MB
Driver Version: 6.14.10.4820
Video BIOS: 1471
Current Graphics Mode: 1024 by 768 High Color (75Hz)
Devices Connected to the Graphics Accelerator:
Active Monitors: 1
Monitor Name: Plug and Play Monitor
Display Type: Analog
Gamma Value: 2.20
DDC2 Protocol: Supported
Maximum Image Size: Hor 14.0 inches, Ver 10.0 inches
VirtualDub 1.9.11
Build 32842/release(Fri Dec 24 13:18:44 2010)
Please note from my initial post that the pan (1.0 beta 2) filter from Donald Graft (you I believe) loads fine if that means anything.
Thanks.
Re: Logo 1.7
I don't have a clue. Try posting about it at the VirtualDub forum.
Re: Logo 1.7
I have done so per your suggestion.
Thanks.
Thanks.
Re: Logo 1.7
RESOLVED.
The loading issue with Logo 1.7 has been resolved by installing the MS update to VC80.crt xxxxxxxxx8.0.50727.4053.
The version on the machine with XP home was not xxxxx.4053.
The full conversation can be seen over on the unofficial VirtualDub support site.
Logo 1.7 is now functioning properly and is a welcome and useful addition.
Thanks for taking the time to develop and for making it available.
The loading issue with Logo 1.7 has been resolved by installing the MS update to VC80.crt xxxxxxxxx8.0.50727.4053.
The version on the machine with XP home was not xxxxx.4053.
The full conversation can be seen over on the unofficial VirtualDub support site.
Logo 1.7 is now functioning properly and is a welcome and useful addition.
Thanks for taking the time to develop and for making it available.
Re: Logo 1.7
Thanks for the status update and I'm glad you got it working.
- TheRoofInhabitant
- Posts: 4
- Joined: Mon May 23, 2011 11:23 am
Re: [RESOLVED] Logo 1.7 will not load in VirtualDub
Sorry, I'm having this problem too: could someone post the link for that upload, please?
Re: [RESOLVED] Logo 1.7 will not load in VirtualDub
I think it is included in this update:
http://support.microsoft.com/kb/973923
Correct me if I am wrong, AntrimMan. I searched at the VirtualDub forum but didn't find your thread.
http://support.microsoft.com/kb/973923
Correct me if I am wrong, AntrimMan. I searched at the VirtualDub forum but didn't find your thread.
- TheRoofInhabitant
- Posts: 4
- Joined: Mon May 23, 2011 11:23 am
Re: [RESOLVED] Logo 1.7 will not load in VirtualDub
Thank you, I'll download it now!
I asked this here because I couldn't find the Thread in the Virtualdub Forum...
Anyway I wanted to thank you for all your plug-ins! Some of them are beautiful and very very useful!
I asked this here because I couldn't find the Thread in the Virtualdub Forum...
Anyway I wanted to thank you for all your plug-ins! Some of them are beautiful and very very useful!
- TheRoofInhabitant
- Posts: 4
- Joined: Mon May 23, 2011 11:23 am
Re: [RESOLVED] Logo 1.7 will not load in VirtualDub
It Works Perfectly!
Here's the Microsoft Download Area link for the other users having the same problem:
http://www.microsoft.com/downloads/en/d ... laylang=en
Thank you so much, admin!
Here's the Microsoft Download Area link for the other users having the same problem:
http://www.microsoft.com/downloads/en/d ... laylang=en
Thank you so much, admin!
Re: [RESOLVED] Logo 1.7 will not load in VirtualDub
You're welcome but I merely channeled AntrimMan, so thanks to him too.
- TheRoofInhabitant
- Posts: 4
- Joined: Mon May 23, 2011 11:23 am
Re: [RESOLVED] Logo 1.7 will not load in VirtualDub
Thanks also to AntrimMan, obviouslòy!
- Visitorsama
- Posts: 2
- Joined: Wed Jan 04, 2012 9:31 pm
Re: [RESOLVED] Logo 1.7 will not load in VirtualDub
It doesn work for me, I have a x32, and in the pages, not exit uodate to me, waht sould i do?
Re: [RESOLVED] Logo 1.7 will not load in VirtualDub
This English is unintelligible to me. Please explain better, but do it in the other thread you created. Thank you.Visitorsama wrote:in the pages, not exit uodate to me