Support forum for DG Tools

Interesting. Thank you for the report. Can you please give me a link to buy that BD?

https://www.amazon.com/Naked-Alibi-Blu- ... B07WPX4V1T or https://www.kinolorber.com/product/naked-alibi-blu-ray

Thank you. Ordered. Will arrive tomorrow.

The license for DGDemux is revised as follows:

-----
DGDemux by Donald A. Graft may be freely used by end users directly
invoking the executable DGDemux.exe. DGDemux is not licensed
for use by, or for incorporation into, any third-party software,
unless explicit permission has been granted by Donald A. Graft
upon a request for the same. DGDemux.exe and its documentation are
copyrighted and may not be redistributed.

No guarantees of any kind are offered or implied for DGDemux.

Donald A. Graft
-----

Added a listing of the opened M2TS files and fixed the angle processing hopefully for good. Want to have a look at LPCM wrapping before making a new release.

Naked Alibi is ripping right now.

OK borderline, here's what I have done for you (already tested). There is a new option -ffsl (first file size limit). This option defaults to 0 (check disabled). If ffsl > 0 and if the size of the first M2TS file in the playlist is less than the ffsl value, then the first M2TS is ignored.The option -ffsl 1000000 enables correct fps detection and demuxing of Naked Alibi with AV sync.

BTW, eac3to also fails with Naked Alibi and needs a fix like this.

If you absolutely must have that logo then you will have to re-append it in your encoding process and provide some audio for it. Seems pretty pointless to me though. Great flick, BTW.

EDIT: Need to adjust the chapter times apparently, too. Hmm, may not be so easy. Investigating.
-----
> dgdemux -i h:\rips\naked_alibi\bdmv\playlist\00004.mpls -ffsl 1000000
DGDemux 1.0.0.2 by Donald A. Graft
Copyright (C) 2019-2020 Donald A. Graft, All Rights Reserved

DGDemux: Ignoring h:\rips\naked_alibi\bdmv\STREAM\00010.m2ts as too small.

h:\rips\naked_alibi\bdmv\STREAM\00004.m2ts
h:\rips\naked_alibi\bdmv\STREAM\00000.m2ts

1011: Video
1100: DTS HDMA L+R 48 1536 [fra]
1101: AC3 2.0 48 192 [eng]
1200: PGS subtitles [eng]
-----

Rock, just make a 'skip first M2TS' option. ffsl? Really? Snort.

Been thinking about investing in gold coins. Wanna make a fortune? Hoomins,
send a PM and we will make you rich beyond even your wildest, most Moose-like,
dreams.

https://www.youtube.com/watch?v=_lTB8m6z_sY

That's right, Bullwinkle. Let's go!

Revised to use -sf (skip first). Also the chapters are adjusted when -sf is given. Release later today.

Here is version 1.0.0.2. The most important changes are:

* Now prints a listing of the M2TS files in the playlist when omitting the -o option.

* Fully fixed the angle handling. All angles are now accessible using 1-based numbering.

* Added a -sf option to skip the first M2TS (and adjust the chapters) for disks such as Naked Alibi.

* The presence of an embedded AC3 for THD audio is now indicated in the stream listing. E.g.:
1100: THD 48000 8ch (plus embedded AC3) [eng]

* Updated the help file, the to-do list, and the license.

http://rationalqm.us/dgdemux/DGDemux_1002.rar

Probably implement WAV wrapping for LPCM next. Whee!

If there was a like button on the forum, I'd click it

You're right, hydra3333! Where is that button?

We aim to please and we thank the divine for energizing us all. Whee!

Bullwinkle told me to watch out for a Russian spy lady seen several times. Can't be too careful these days.

I'm glad you liked the movie.

Testing v1.0.0.2 with -sf and DGDemux worked great.
Cheers.

Following is the current to-do list (in no particular order). Looking at a GUI release and updated DGDemux later today.

----------------------------------------------------------------------------------------------
The DTS audio gets tagged with 1536 which is the core audio but the
actual DTS is DTS MA. E.g: PID 1101 C+L+R+SL+SR 48 1536 eng DELAY 0ms.dts

DTS express streams are not demuxed.

Doesn't demux the secondary video.

Demux simultaneously forced-only subtitle stream and normal stream.

Split by chapters, i.e., Japanese disks with one episode per M2TS.

Linux version.

I had forgotten to ask for the most important feature which I need for chapterEditor to create
Mulit-Edition-mkvs. With eac3to is it possible to use the m2ts files as input and only so I can
create such mkvs. In eac3to I can append all the m2ts-path with a "+". [hubblec4]

Mitigate the console interface issue. E.g., cannot kill with CTRL-C in powershell,
don't get shell prompt after DGDemux terminates, etc.

It would be nice if DGDemux could also show the codec or similar infos like BDInfo does, if possible.

This is maybe not a DGDemux problem, but I can not import/open the extracted .pcm audio file in mkvtoolnix. Tools like DVDFab can save to mkv with pcm audio. Or maybe DGDemux could save it as wav?
pcm = raw wave audio without a header, correct? [ChaosKing]

It would be nice to have some indication of completed process, like "done". Just "100" a
little weird IMO. [redbtn]

It would be nice to have option to demux files to directory where cmd is located (instead of setting output directory directly). Like "E:\Films>dgdemux -i input-dir\00800.mpls -newoption" demuxing to E:\Films [redbtn]

Need 'skip last' and 'skip duplicates' options.

Some kind of playlist scanning aka eac3to.

Default output name prefix. Maybe it is possible to have default output name like "DGDemux"
or "playlist name" when using just "-o"? I like "-o NAME" feature, but I think having a
default name is even better. [redbtn]

[DONE] Create destination directory if it does not exist.

[DONE] Verify handling of mark_type != 1. E.g., Terminators 2, 95 chapters
extracted when 72 is claimed to be correct.

[DONE] Fix missing Frame_Rate for all video types.

[DONE] Info only option and stream selection.

[DONE] FPS CLI option to force frame rate. Warning if FPS not detected.

[DONE] Verify angle numbering base 1 and fix if needed.

[DONE] The listing when no output is specified should show THD embedded stream.

[DONE] Needs a GUI.

[DONE] Your info about a mpls file need an extension to show all the used m2ts files.

I saw the Russian spy lady again, Rock. Watch out!

Who is this Overdrive80 twerp? We're here slaving away to give free solutions to modern dilemmas, and this guy attacks DG because he feels "offended". Snort!

Watching for her!

Let the Overdrive80 thing go, Bullwinkle, we can't be bothered with every mosquito that buzzes around our ears, every chihuahua that nips at our ankles. Give him the mosquito slap and be done with it.

Life is just one massive cartoon. We can write our own scripts. Nothing is real.

Just got a new shipment of gold coins at very good price. Gold is real, baby. Send PM if interested!

See if this GUI beta works for y'all. You have to keep the two new executables paired in the same directory.

http://rationalqm.us/dgdemux/DGDemux_1003.rar

Rocky wrote: ↑

Wed Nov 20, 2019 8:18 pm

See if this GUI beta works for y'all. You have to keep the two new executables paired in the same directory.

http://rationalqm.us/dgdemux/DGDemux_1003.rar

Seems to work just fine with a couple of discs.

TufInside wrote: ↑

Wed Nov 20, 2019 9:00 pm

Seems to work just fine with a couple of discs.

I have some great discs for you, honey. Come with me.

Can y'all please re-download 1003 to get a fix to the video demuxing?

Slipstreamed another fix into 1003. GUI progress indicator was getting stuck. Please re-download and update DGDemuxGUI.exe.

Tested latest GUI version.
Took a UHD disc and demuxed everything from the main playlist
Remuxed video and main audio track with MKVToolNix
Played in sync
One thing, don't know if it is a bug, feature, or just is.
In the output prefix field I entered nothing, I skipped that field.
Every track name started with PIDxx except for the video.
It had a null name (".265")
It muxed fine and the file (".mkv") played in sync as stated, no issue

Mounted ISO
Tried it Seems to work alright

A mounted ISO is writable???