Support forum for DG Tools

Posted: **Wed Apr 29, 2015 2:24 pm**

No popup anymore - thanks!
Now it is time to integrate it. May need a while as I am not so fast as you are

Posted: **Wed Apr 29, 2015 3:09 pm**

Zathor wrote: I am not so fast as you are

I'm not so sure about that. It's just that now that I am retired I can jump on things right away. No boss telling me what to do.

Take your time and thank you for your work.

Posted: **Mon May 25, 2015 12:25 pm**

Finally I have it up and running in MeGUI. While implementing I noticed these things:
- DGIndexNV writes in line 4 of the DGI file the absolute path information while DGIndexIM write relative paths (absolute if on another drive)
- When audio is to be demuxed DGIndexIM removes the file extension in the path while DGIndexNV does not:
e.g. videofile.dgi PID 13f2 2_0ch 48KHz 448Kbps DELAY 97ms.ac3
- I can use the hardware mode of DGIndexIM even when only logged on with RDP - DGIndexNV does not work in such an environment

- DGIndexNV stalled when a license.txt was available without proper license in it. I clicked on the error window but I had to kill the process. Did not tried that with DGIndexIM.

Btw no need to change anything regarding the first two points. I implemented switches in the code to take into account these differences. Thanks again!

Posted: **Mon May 25, 2015 12:42 pm**

Thank you for the feedback, Zathor!

Zathor wrote:Finally I have it up and running in MeGUI. While implementing I noticed these things:
- DGIndexNV writes in line 4 of the DGI file the absolute path information while DGIndexIM write relative paths (absolute if on another drive)

You can control that with the setting Full_Path_In_Files in the DGDecIM.ini file. It defaults to 0. It is controllable by the DGIndexNV GUI, but DGIndexIM has no GUI.

- When audio is to be demuxed DGIndexIM removes the file extension in the path while DGIndexNV does not:
e.g. videofile.dgi PID 13f2 2_0ch 48KHz 448Kbps DELAY 97ms.ac3

That's strange. I have never seen DGI in the audio filename like that. Can you double check this, using DGIndexNV directly?

- I can use the hardware mode of DGIndexIM even when only logged on with RDP - DGIndexNV does not work in such an environment

Interesting!

- DGIndexNV stalled when a license.txt was available without proper license in it. I clicked on the error window but I had to kill the process. Did not tried that with DGIndexIM.

You mean an empty license file? Or just a wrong license? Please give me a license file that causes this, because I cannot duplicate it. Thank you.

Posted: **Mon May 25, 2015 2:16 pm**

- When audio is to be demuxed DGIndexIM removes the file extension in the path while DGIndexNV does not:
e.g. videofile.dgi PID 13f2 2_0ch 48KHz 448Kbps DELAY 97ms.ac3
That's strange. I have never seen DGI in the audio filename like that. Can you double check this, using DGIndexNV directly?

I cannot reproduce it anymore. Maybe I have mixed this up with DGAVCIndex. Sorry

- DGIndexNV stalled when a license.txt was available without proper license in it. I clicked on the error window but I had to kill the process. Did not tried that with DGIndexIM.
You mean an empty license file? Or just a wrong license? Please give me a license file that causes this, because I cannot duplicate it. Thank you.

license.txt was from the year 2010 with one line in it. I start DGIndexNV with:

Code: Select all

"dgindexnv.exe" -i "D:\_TEST\video.mkv" -o "D:\TEMP\tllbe550.sdj\video.dgi" -e -h

I click on the "Invalid license" popup but then the process does not close itself. I have to kill it as otherwise I cannot replace the locked license.txt file.

Posted: **Mon May 25, 2015 2:34 pm**

And some benchmarks measured with AVSMeter:

Machine 1:
1: DGIndexNV (377 fps)
2: L-SMASH (146 fps)
3: FFMS2 (125 fps, threads=0)
4: FFMS2 (40 fps, threads=1)
5: DGIndexIM (30 fps, SW engine)

Machine 2:
1: DGIndexIM (273 fps, HW engine)
2: L-SMASH (229 fps)
3: FFMS2 (191 fps, threads=0)
4: FFMS2 (55 fps, threads=1)
5: DGIndexIM (43 fps, SW engine)

Machine & source specs does not matter so much. More important is the order of the indexer plugins. Sadly I do not have currently a machine wich is capable of DGIndexNV + DGIndexIM HW. But based on the numbers I guess that DGIndexNV is on the top.

Posted: **Mon May 25, 2015 7:38 pm**

After you dismiss the license popup you can't close DGIndexNV normally? I can't duplicate that.

EDIT: Ooh, never mind, I just noticed you use CLI. Investigating...

Posted: **Mon May 25, 2015 11:10 pm**

I'm happy to report that DGIndexIM (50) is working fine here in MeGUI 2557 on my PC - Win7 64-bit, AMD-FX6300 processor - so SW engine only. Just ran a few tests with some AVCHD camcorder (1080/30p) mts clips, I'm seeing an indexing rate of around 720 fps. I haven't compared decode/AVS output rates empirically (AVS Meter). Yes, served to VDub, DGSourceIM plays a bit more sluggishly than L-Smash (LWLibavVideoSource), but I'm not really bothered. My primary use is for transcoding mts clips to a lossless intermediate for editing, and there the limiting factor is the encode rate. I'm just happy that I can now generate the AVS script automatically without having to copy paste the source file path into a template script. Thanks to Zathor and Neuron2 for making this possible.

Posted: **Mon May 25, 2015 11:19 pm**

Good to hear. Thanks for your information. Yes, IM software mode is not a stellar performer. But it is frame accurate.

Looks like we can retire DGAVCDecDI as the IM stuff is doing the job.

Posted: **Tue May 26, 2015 6:51 am**

admin wrote:...... But it is frame accurate

That's why I use it

Posted: **Wed May 27, 2015 11:17 am**

I slipstreamed the fix for DGIndexNV failing to terminate when a bad license is found in CLI -e mode. DGIndexIM was not affected.

Posted: **Sun May 31, 2015 11:27 am**

Thank you very much!
Do you plan to add also MVC support?

Posted: **Sun May 31, 2015 3:19 pm**

Not to DGDecNV as it is not supported by CUVID. To DGDecIM, yes, at some point. For now there is DGMVCDec that runs on QuickSync (that is Intel Media SDK).

Posted: **Mon Oct 05, 2015 9:30 am**

so today i was wanting to get a faster decoding fps than that which i can get from DGDecNV (vp5 ~130fps) so i remember that my old sandy bridge i7 2600k (3000hd) was able do double the speed which is great! however there's some bad news it seems.
i've upgraded to the latest skylake i7 6700k (hd 530) to find out it doesn't support hardware decoding in DGDecIM i think?

however there's one thing i do wanna say i noticed is that i can use QSVEncC without any issues (at least for the hardware encoding side) whiles using DGDecNV.

p.s before you ask this happens to every single file i've tried and it doesn't matter if its 32bit or 64bit they both give the same issue of the app hanging and waiting :bug:

Posted: **Mon Oct 05, 2015 10:21 am**

Intel has not made a formal release of INDE supporting Skylake:

https://software.intel.com/en-us/forums ... pic/593838

However, they say you can have a try with media sdk version 6.0.0.388 but no guarantees. I currently use 6.0.0.349.

I will try in the next days to rebuild with 6.0.0.388 and give you a test build.

Posted: **Mon Oct 05, 2015 10:33 am**

admin wrote:Intel has not made a formal release of INDE supporting Skylake:

https://software.intel.com/en-us/forums ... pic/593838

However, they say you can have a try with media sdk version 6.0.0.388 but no guarantees. I currently use 6.0.0.349.

I will try in the next days to rebuild with 6.0.0.388 and give you a test build.

sure that would be great!

Posted: **Mon Oct 05, 2015 11:03 am**

Try this:

http://rationalqm.us/misc/aceado.zip

I don't think DGIndexIM is affected but if so let me know.

Posted: **Mon Oct 05, 2015 11:16 am**

admin wrote:Try this:

http://rationalqm.us/misc/aceado.zip

I don't think DGIndexIM is affected but if so let me know.

so you know its works just fine in software decoding which you would expect same with indexing aswell also i've just tested it out and it still hangs it seems. both 32bit and 64bit was tested

i do have a slight idea but you might say no but there's the source code to QSVEncC which might help you out maybe ? https://onedrive.live.com/?cid=6bdd4375 ... 8933C6!482

Posted: **Mon Oct 05, 2015 11:18 am**

Lemme see if it hangs on my Haswell system. If so, there's a chance to fix it, otherwise we'll have to wait until I get a Skylake and/or INDE officially supports Skylake.

Posted: **Mon Oct 05, 2015 11:32 am**

Rebuilt DLLs work fine here on my i7 4770K. I'll do some research about this.

Posted: **Mon Oct 05, 2015 11:33 am**

admin wrote:Rebuilt DLLs work fine here on my i7 4770K. I'll do some research about this.

sure the source code to QSVEncC might shine some light on how it talks to it but i wouldn't have a clue myself

lol

Posted: **Mon Oct 05, 2015 11:40 am**

It's doubtful that will be of any help but I'll check everything that might be relevant.

Posted: **Mon Oct 05, 2015 11:52 am**

What is your Intel graphics driver version?

Posted: **Mon Oct 05, 2015 12:11 pm**

admin wrote:What is your Intel graphics driver version?

that would be 15.40.7.4279 (10.18.15.4279)

Posted: **Mon Oct 05, 2015 12:24 pm**

That's the latest. Thank you.

Support forum for DG Tools

DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section

Re: DGDecIM section