Page 5 of 18

Re: Binaries Update Notification Thread

Posted: Wed May 23, 2018 4:00 pm
by admin
DGHDRtoSDR 1.2 slipstream:

Corrected errors in the user manual.

http://rationalqm.us/misc/DGHDRtoSDR_1.2.rar

Re: Binaries Update Notification Thread

Posted: Sun Jun 03, 2018 11:46 am
by admin
DGHDRtoSDR 1.3 slipstream:

* Added a new gamut mapping mode gm="compress", which is the new default. To run the previous way
it is gm="inverse". Refer to the manual for details.

* Added the version number in the DLL properties.

* Updated the manual.

http://rationalqm.us/misc/DGHDRtoSDR_1.3.rar

Re: Binaries Update Notification Thread

Posted: Fri Jun 15, 2018 9:32 am
by admin
DGDecNV slipstream 148:

* Added support for demuxing bluray PGS subtitles when an MPLS file is opened. The log file (when enabled) shows the number of total subtitles and forced subtitles for each PGS stream. [renols]

* Updated the DGIndexNV manual.

Re: Binaries Update Notification Thread

Posted: Mon Jun 18, 2018 10:39 am
by admin
DGHDRtoSDR 1.4:

* Corrected the YUV420P16 to RGB conversion.

* Deleted the gm option as gm="inverse" was actually pushing some colors further out of gamut.
For now linear compression is used. I am studying options for further modes of gamut mapping.

* The light parameter is now re-purposed as the brightness of the target display (max nits of the display).

* The gamma parameter may now be used freely, i.e., for any of the tonemapping modes.

* The sat parameter is now also a free parameter and can be used to increase or decrease the saturation
of the final output.

* The tm option now provides mobius tonemapping and that is the new default. I prefer it to Hable.

* The user manual was updated.

Refer to the manual for usage details. Things have changed quite a bit.

http://rationalqm.us/misc/DGHDRtoSDR_1.4.rar

Re: Binaries Update Notification Thread

Posted: Tue Jun 19, 2018 10:08 am
by admin
Slipstream for DGHDRtoSDR 1.4:

* Improved the gamut mapping.

http://rationalqm.us/misc/DGHDRtoSDR_1.4.rar

Re: Binaries Update Notification Thread

Posted: Fri Jun 22, 2018 11:17 am
by admin
DGDecNV slipstream 149:

* The info overlay for DGDecodeNV now displays the DLL version number. Previously,
it displayed the DGIndexNV version number. [dmcs]

* DGIndexNV no longer puts a DELAY value in the demuxed file names. This DVD VOB
era heuristic is no longer accurate and reliable enough to be useful. Users should
use human perception to determine and set proper delays when re-muxing. Please
read the relevant threads on the forum for typical procedures. E.g., viewtopic.php?f=8&t=658 [gonca]

* DGIndexNV now displays HLG SEI information in the DGI file. This permits identification
of HLG-coded streams.

* The log file written by DGIndexNV now properly logs demuxed PGS subtitles for bluray M2TS (when
opened with the playlist) and MKV, together with counts of total and forced subs. The count of
total subs in slipstream 148 was corrected. [renols]

* The demux menu now supports a 'Forced subs only' checkbox for demuxing PGS subtitles. [renols]

* Warning popups were added for improper attempts to load a DGI file. Only File/Load Project
can be used.

* Fixed the ASPECT line in the DGI file for AVC streams with unspecified aspect ratio. [dmcs]

* Updated the DGIndexNV user manual.

Re: Binaries Update Notification Thread

Posted: Sat Jun 23, 2018 11:13 am
by admin
DGDecNV slipstream 150:

* The 'PGS forced subtitles only' option was moved to the Settings dialog and is now
stored in the INI file.

* The Demux dialog settings are now restored from the DGI file when doing Load Project.

* DGIndexNV manual updated.

Re: Binaries Update Notification Thread

Posted: Wed Jun 27, 2018 10:54 am
by admin
DGDecNV slipstream 152 (number 151 was skipped):

* Fixed regression in 150 for TS demuxing; it was totally broken. :oops:

* Allowed detection and demuxing of PGS subtitles when an M2TS is opened directly, with
the limitation that the language is not reported.

Hopefully all this demuxing and PGS subtitles stuff has stabilized. If not, well, you know what to do (post a bug report). ;)

Re: Binaries Update Notification Thread

Posted: Wed Jul 11, 2018 11:26 am
by admin
DGDecNV slipstream 153:

* MPLS parser was broken for playlists with more than one M2TS. [renols]

* DGIndexNV Demux dialog crashed on exit for more than 51 tracks enabled. [renols]

Re: Binaries Update Notification Thread

Posted: Sat Jul 14, 2018 9:49 am
by admin
DGDecNV slipstream 154:

* Fixed another bug in the MPLS parser. [Boulder]

Re: Binaries Update Notification Thread

Posted: Wed Jul 25, 2018 9:16 pm
by admin
DGHDRtoSDR 1.8:

* Added fulldepth parameter, which when set to true outputs 10-bit SDR in YUV420P16.
You can use this to reduce banding for subsequent 10-bit encodes. Use VirtualDub2
[props -> shekh] to preview scripts with fulldepth=true.

:salute: Dion

http://rationalqm.us/misc/DGHDRtoSDR_1.8.rar

Re: Binaries Update Notification Thread

Posted: Sun Jul 29, 2018 5:15 am
by admin
DGDecNV slipstream 155:

* The __aud__ feature of the AVS template support was not working for MKV and MP4. Fixed. [Phoenix]

Re: Binaries Update Notification Thread

Posted: Sun Jul 29, 2018 9:08 pm
by admin
DGDecNV slipstream 156:

* Fixed __aud__ for CLI. [Phoenix]

Re: Binaries Update Notification Thread

Posted: Thu Aug 09, 2018 6:46 pm
by admin
DGDecNV slipstream 157:

* When demuxing, the count of subs in the log file was wrong when one or more
subs needed more than one Object Definition Segment. [renols]

Re: Binaries Update Notification Thread

Posted: Thu Aug 09, 2018 7:00 pm
by admin
DGHDRtoSDR 1.9:

* Added native Vapoursynth support. Refer to the user document for usage.

http://rationalqm.us/hdr/DGHDRtoSDR_1.9.rar

Re: Binaries Update Notification Thread

Posted: Sat Aug 18, 2018 8:25 am
by admin
Cube 1.0 released.

This dual Avisynth+/Vapoursynth filter allows a 3D LUT (*.cube file) to be applied via an Avisynth+ script or Vapoursynth script. This revision of sekrit-twc's vscube adds the Avisynth+ support. The modified source code is included in the distribution.

http://rationalqm.us/hdr/avscube_1.0.rar

Re: Binaries Update Notification Thread

Posted: Mon Aug 27, 2018 8:35 am
by admin
Slipstream 158 for DGDecNV:

* Enabled the Demux menu for elementary streams. This allows the user to output a trimmed elementary stream by setting a range, enabling demux of the video, and then saving the project. This capability had been inadvertently lost when the demux design was overhauled. [Etienne]

* Updated the DGIndexNV manual to account for the above change. The description for the COLORIMETRY line in the DGI file was also expanded.

Re: Binaries Update Notification Thread

Posted: Thu Sep 06, 2018 7:30 am
by admin
Slipstream for DGHDRtoSDR 1.9:

* Corrected the check of the input format for Vapoursynth. YUV422 and YUV444 are now rejected. Only YUV420 is accepted. [ChaosKing]

Re: Binaries Update Notification Thread

Posted: Sat Sep 15, 2018 8:50 am
by admin
Slipstream 159 for DGDecNV:

* Suppress sparse cues message box when in CLI mode. [Zathor]

Re: Binaries Update Notification Thread

Posted: Wed Oct 10, 2018 5:36 pm
by admin
DGHDRtoSDR 1.10:

* Fixed memory leak in the Vapoursynth native code.

http://rationalqm.us/hdr/DGHDRtoSDR_1.10.rar

Re: Binaries Update Notification Thread

Posted: Wed Oct 17, 2018 1:01 pm
by admin
DGHDRtoSDR 1.11:

* Fixed sat option for Vapoursynth native.

* Added hue option and default hue correction for the gamut mapping.

http://rationalqm.us/hdr/DGHDRtoSDR_1.11.rar

Re: Binaries Update Notification Thread

Posted: Thu Oct 18, 2018 11:08 am
by admin
Please re-download DGHDRtoSDR 1.11 as I slipstreamed another fix for the Vapoursynth native support.

Re: Binaries Update Notification Thread

Posted: Sun Oct 21, 2018 11:07 am
by admin
Slipstreamed DGHDRtoSDR 1.11 to reduce the default hue to 5.

http://rationalqm.us/hdr/DGHDRtoSDR_1.11.rar

Re: Binaries Update Notification Thread

Posted: Sat Oct 27, 2018 9:48 am
by admin
Slipstream 160 for DGDecNV:

* Added support for Turing GPUs (RTX 20xx).

* Expanded the error text printed in the error popup when one of the
files listed in the DGI file cannot be opened. The text now explains
possible reasons for the error.

Re: Binaries Update Notification Thread

Posted: Wed Oct 31, 2018 11:16 am
by admin
DGMVCSource beta 26:

* Rebuilt with the latest Intel MSDK 2018 R2.

http://rationalqm.us/dgmvcsource/dgmvcsource100b26.zip