Page 6 of 18

Re: Binaries Update Notification Thread

Posted: Wed Jul 25, 2018 9:16 pm
by admin
DGHDRtoSDR 1.8:

* Added fulldepth parameter, which when set to true outputs 10-bit SDR in YUV420P16.
You can use this to reduce banding for subsequent 10-bit encodes. Use VirtualDub2
[props -> shekh] to preview scripts with fulldepth=true.

:salute: Dion

http://rationalqm.us/misc/DGHDRtoSDR_1.8.rar

Re: Binaries Update Notification Thread

Posted: Sun Jul 29, 2018 5:15 am
by admin
DGDecNV slipstream 155:

* The __aud__ feature of the AVS template support was not working for MKV and MP4. Fixed. [Phoenix]

Re: Binaries Update Notification Thread

Posted: Sun Jul 29, 2018 9:08 pm
by admin
DGDecNV slipstream 156:

* Fixed __aud__ for CLI. [Phoenix]

Re: Binaries Update Notification Thread

Posted: Thu Aug 09, 2018 6:46 pm
by admin
DGDecNV slipstream 157:

* When demuxing, the count of subs in the log file was wrong when one or more
subs needed more than one Object Definition Segment. [renols]

Re: Binaries Update Notification Thread

Posted: Thu Aug 09, 2018 7:00 pm
by admin
DGHDRtoSDR 1.9:

* Added native Vapoursynth support. Refer to the user document for usage.

http://rationalqm.us/hdr/DGHDRtoSDR_1.9.rar

Re: Binaries Update Notification Thread

Posted: Sat Aug 18, 2018 8:25 am
by admin
Cube 1.0 released.

This dual Avisynth+/Vapoursynth filter allows a 3D LUT (*.cube file) to be applied via an Avisynth+ script or Vapoursynth script. This revision of sekrit-twc's vscube adds the Avisynth+ support. The modified source code is included in the distribution.

http://rationalqm.us/hdr/avscube_1.0.rar

Re: Binaries Update Notification Thread

Posted: Mon Aug 27, 2018 8:35 am
by admin
Slipstream 158 for DGDecNV:

* Enabled the Demux menu for elementary streams. This allows the user to output a trimmed elementary stream by setting a range, enabling demux of the video, and then saving the project. This capability had been inadvertently lost when the demux design was overhauled. [Etienne]

* Updated the DGIndexNV manual to account for the above change. The description for the COLORIMETRY line in the DGI file was also expanded.

Re: Binaries Update Notification Thread

Posted: Thu Sep 06, 2018 7:30 am
by admin
Slipstream for DGHDRtoSDR 1.9:

* Corrected the check of the input format for Vapoursynth. YUV422 and YUV444 are now rejected. Only YUV420 is accepted. [ChaosKing]

Re: Binaries Update Notification Thread

Posted: Sat Sep 15, 2018 8:50 am
by admin
Slipstream 159 for DGDecNV:

* Suppress sparse cues message box when in CLI mode. [Zathor]

Re: Binaries Update Notification Thread

Posted: Wed Oct 10, 2018 5:36 pm
by admin
DGHDRtoSDR 1.10:

* Fixed memory leak in the Vapoursynth native code.

http://rationalqm.us/hdr/DGHDRtoSDR_1.10.rar

Re: Binaries Update Notification Thread

Posted: Wed Oct 17, 2018 1:01 pm
by admin
DGHDRtoSDR 1.11:

* Fixed sat option for Vapoursynth native.

* Added hue option and default hue correction for the gamut mapping.

http://rationalqm.us/hdr/DGHDRtoSDR_1.11.rar

Re: Binaries Update Notification Thread

Posted: Thu Oct 18, 2018 11:08 am
by admin
Please re-download DGHDRtoSDR 1.11 as I slipstreamed another fix for the Vapoursynth native support.

Re: Binaries Update Notification Thread

Posted: Sun Oct 21, 2018 11:07 am
by admin
Slipstreamed DGHDRtoSDR 1.11 to reduce the default hue to 5.

http://rationalqm.us/hdr/DGHDRtoSDR_1.11.rar

Re: Binaries Update Notification Thread

Posted: Sat Oct 27, 2018 9:48 am
by admin
Slipstream 160 for DGDecNV:

* Added support for Turing GPUs (RTX 20xx).

* Expanded the error text printed in the error popup when one of the
files listed in the DGI file cannot be opened. The text now explains
possible reasons for the error.

Re: Binaries Update Notification Thread

Posted: Wed Oct 31, 2018 11:16 am
by admin
DGMVCSource beta 26:

* Rebuilt with the latest Intel MSDK 2018 R2.

http://rationalqm.us/dgmvcsource/dgmvcsource100b26.zip

Re: Binaries Update Notification Thread

Posted: Thu Nov 15, 2018 4:57 pm
by admin
Slipstream 161 for DGDecNV:

* Revised the machine ID generation to be more stable for the case that fallback must be made to the HDD identification. Previously, the HDD volume ID was used, but this could change when the OS is updated. Now, the HDD HW serial number is used. As this is hard-coded, it will not change when OS updates are applied. Note that if your system uses this fallback (because no usable motherboard serial number is available), you will need to generate a new license when you get this slipstream. Thereafter, things should be stable.

Re: Binaries Update Notification Thread

Posted: Fri Nov 30, 2018 11:57 am
by admin
Slipstream 162 for DGDecNV:

* Removed the limitation that the show2 offsets need to be multiples of 10 (offsetX) and 20 (offsetY).
The offsets may now be chosen freely.

Re: Binaries Update Notification Thread

Posted: Tue Dec 11, 2018 5:17 pm
by admin
Slipstream 163 for DGDecNV:

* In DGIndexNV, the cropping filter is now a cropping tool. Any desired cropping must now be
done using either DGSource() or Avisynth(+). The cropping tool can be used to determine suitable
values. Refer to the revised user manuals for more details. [Zathor]

* The DGI file format version is updated to NV21. CLIP lines are no longer generated.

* The DGIndexNV INI file format is revised. Please delete your existing INI file before opening
this new version.

* For MKV and MP4 streams, the container frame rate is now preferred over the ES frame rate. [Zathor]

* Previously if the video demux item was checked but the enable demux processing checkbox
was not checked, the video was demuxed when it should not be. [Guest 2]

* The DGIndexNV and DGDecodeNV user manuals were updated. [with help from DJATOM]

Re: Binaries Update Notification Thread

Posted: Mon Dec 17, 2018 11:31 am
by admin
Slipstream 164 for DGDecNV:

* Added 'Export to script' checkbox for the Cropping Tool dialog. This allows the generated Avisynth script to have its cropping parameters automatically populated. Refer to the users manual for proper operation. [Guest 2]

Re: Binaries Update Notification Thread

Posted: Fri Jan 25, 2019 2:22 pm
by admin
Cube 1.1:

* Fixed fullrange=false.

http://rationalqm.us/hdr/avscube_1.1.rar

Re: Binaries Update Notification Thread

Posted: Sun Jan 27, 2019 8:42 am
by admin
Please re-download Cube 1.1 as the first version was broken.

Re: Binaries Update Notification Thread

Posted: Tue Jan 29, 2019 1:04 pm
by admin
Slipstream 165 for DGDecNV:

Next iteration of the cropping design based on suggestion from Guest 2.

* Cropping tool now shows the mod values for the crop values.

* Cropping tool now has an OK button. Exit via OK to retain and use the configured cropping. Exit via the window's X button to discard any changes.

* The 'Export to script' checkbox is eliminated. You now control whether the values get exported by including or not including the __crop__ macro in your template. It's sensible to always include it because it will expand to nothing if cropping is not configured.

* The DGI file now includes a new line called DISP following the SIZ line. This gives the display area, which may differ from the coded size (SIZ), e.g., when coded height 1088 should be displayed as 1080.

* The DGI file format version is bumped to 22.

* Note: if a stream has a display area smaller than the coded size (e.g., 1080 versus 1088) and cropping is not exported or manually included in DGSource(), then DGSource() will use the display area.

Re: Binaries Update Notification Thread

Posted: Sat Feb 09, 2019 2:59 pm
by admin
Slipstream 166 for DGDecNV:

Fixed bug in cropping.

Re: Binaries Update Notification Thread

Posted: Sun Feb 10, 2019 9:31 am
by admin
Slipstream 167 for DGDecNV:

* Fixed FPS detection for some MKV streams.

* Fixed missing display area field of Info dialog for some streams.

Re: Binaries Update Notification Thread

Posted: Fri Feb 15, 2019 8:53 am
by admin
Slipstream 168 for DGDecNV:

* Fixed bug in autocropping. [Boulder]

* Updated the DGDecodeNV user manual to add a note explaining that the cropping
parameters are relative to the original coded size.