[RESOLVED] Problem on Decoding
- sandy_geser
- Posts: 53
- Joined: Sat May 07, 2011 3:43 pm
Re: Problem on Decoding
what DGDecNV / nvidia driver are you using? some people here had issues with glitches but it seems it somehow went away with recent versions of nvidia and DGDecNV, at least for some who reported.
Re: Problem on Decoding
Also, please post your script and a link to a sample file that shows the glitches.
Re: Problem on Decoding
@sandy_geser
Thanks for the suggestion, i downloaded the latest driver 296.10 but the result is the same, garbled frame as posted above.
I'm using DGIndex Nv 2042.
@admin
Yes, as soon as i'll post a block of .m2ts and related result (and .avs script) from DGIndexNV
Thanks for the suggestion, i downloaded the latest driver 296.10 but the result is the same, garbled frame as posted above.
I'm using DGIndex Nv 2042.
@admin
Yes, as soon as i'll post a block of .m2ts and related result (and .avs script) from DGIndexNV
Re: Problem on Decoding
I don't need the result, just the script and source sample. You can cut the m2ts with DGSplit.Tlen wrote:Yes, as soon as i'll post a block of .m2ts and related result (and .avs script) from DGIndexNV
Re: Problem on Decoding
The script i use is this
The source clip i've attached here
http://www.mediafire.com/?rn3ridiuf53q7nz
Code: Select all
DGSource("M:\t.dgi")
http://www.mediafire.com/?rn3ridiuf53q7nz
Re: Problem on Decoding
I'm getting 266 bytes per second from that host. Please use mediafire.com.
- sandy_geser
- Posts: 53
- Joined: Sat May 07, 2011 3:43 pm
Re: Problem on Decoding
those 20 secs encode fine for me. Do you see garbling decoding this clip? your issue is throughout the full video or specific spots?Tlen wrote:The script i use is this
The source clip i've attached hereCode: Select all
DGSource("M:\t.dgi")
http://netload.in/dateijdBOxjMXdf.htm
Re: Problem on Decoding
I've updated the link as suggested.
@sandy_geser
I get garbled frames througout the entire video just putting that script in virtualdub.
It decodes just fine with MPC.
@sandy_geser
I get garbled frames througout the entire video just putting that script in virtualdub.
It decodes just fine with MPC.
Re: Problem on Decoding
No problem seen here. I tried both GTX 460 and GT 520 using DGDecNV 2042 and 296.10 drivers.
Why is there no audio in your sample? That means it is not the unprocessed source.
Why is there no audio in your sample? That means it is not the unprocessed source.
Re: Problem on Decoding
Yes, i stripped it down to only the video to make it suitable for upload and download.
Moreover before uploading, i did a DGNV decode test on it too with the same results.
I can eventually provide 10 seconds of the original ustripped source, but that would be very big in bytes.
Let me know.
Moreover before uploading, i did a DGNV decode test on it too with the same results.
I can eventually provide 10 seconds of the original ustripped source, but that would be very big in bytes.
Let me know.
Re: Problem on Decoding
I don't know what to tell you. I cannot duplicate your issue with the sample, nor could sandy_geser do so.
Re: Problem on Decoding
Mmm, i see. I'll try to find out if it's a problem of the GPU or some driver issue.
Can you point me in some particular direction to investigate?
Thanks anyway to both for the support.
Can you point me in some particular direction to investigate?
Thanks anyway to both for the support.
Re: Problem on Decoding
You can try the 301.24 beta driver with DGDecNV 2042.
http://www.nvidia.com/object/winxp-301. ... river.html
http://www.nvidia.com/object/winxp-301. ... river.html
Re: Problem on Decoding
Marking resolved as OP has not followed up and I cannot reproduce the issue.