Page 1 of 1
Re: Project Range
Posted: Mon Oct 23, 2017 6:59 pm
by Guest
Re: Project Range
Posted: Mon Oct 23, 2017 7:15 pm
by admin
Those are the MKV timestamps in units of nanoseconds.
Yes they are the starting and ending frames of the range.
So your range included ~7200 seconds = 120 minutes.
Does it agree?
Re: Project Range
Posted: Mon Oct 23, 2017 7:21 pm
by Guest
Of course, the trailing zeroes are the micro and then nano seconds.
Thanks for clearing it up for me, even when I am on the right track I sometimes miss the obvious.
P.S.
It also works perfectly for hevc in mkv
I am learning more about the capabilities of your tools everyday
Re: Project Range
Posted: Mon Oct 23, 2017 7:25 pm
by admin
I try my best to do the right things.
Two points:
1. An MKV can specify a TimecodeScale other than the default of 1000000. IIRC I handle it correctly.
2. One day I would like to do the video and audio demux as a single pass.
Re: Project Range
Posted: Mon Oct 23, 2017 7:28 pm
by Guest
IIRC I handle it correctly.
Tested your timecodes on a fully muxed mkv by splitting it in mkvmerge with your time stamps, and as far as I can tell it comes out perfect
Re: [RESOLVED] Apply project range to audio (for MKV)
Posted: Mon Oct 23, 2017 7:32 pm
by admin
OK, but I meant I also handle non-default TimecodeScale correctly. Do you have any MKVs with that?
BTW, the MKV spec is a fun and useful read for grokking the deep internals.
https://matroska.org/technical/index.html
Re: [RESOLVED] Apply project range to audio (for MKV)
Posted: Mon Oct 23, 2017 7:36 pm
by Guest
No funky mkv's. I like to keep things neat, straightforward and simple.
Much easier that way.
Once again, thank you for your help
Re: [RESOLVED] Apply project range to audio (for MKV)
Posted: Tue Oct 24, 2017 2:21 pm
by admin
Sure you wouldn't make one with a non-default scale, but I have seen them in the wild.
Re: [RESOLVED] Apply project range to audio (for MKV)
Posted: Tue Oct 24, 2017 5:04 pm
by Guest
Your thoroughness is admirable Don, once again, thanks for your patience and help.
Your software keeps impressing me more all the time
As I learn a little more and wish to go further your tools step up and show that they can do more than I realized
And I will try to remember for next time to count the trailing zeroes, milli >micro > nano
Re: [RESOLVED] Apply project range to audio (for MKV)
Posted: Tue Oct 24, 2017 8:31 pm
by admin
Thanks, Luis.