Page 1 of 1
Re: VS mode cant open DVD
Posted: Thu May 03, 2018 11:44 pm
by Morpheus
The problem is solved.
Matrix(Primary and Transfer) of DVD which has no matrix(primary and transfer) info is Unknown in ClipInfo() instead of "sRGB".Preview is OK.
Re: VS mode cant open DVD
Posted: Fri May 04, 2018 2:13 am
by Morpheus
I have only BT.709 and BT.601(DVD) source.They all work well now...
Re: VS mode cant open DVD
Posted: Fri May 04, 2018 6:18 am
by DJATOM
Downgraded to 391.35 and it fixed "exit on refresh" issue. But I found another similar problem. with show=True I can load the video, but on scrolling (backward/forward) application is closing on it's own. Is that something on my side or with dgtools?
Re: VS mode cant open DVD
Posted: Fri May 04, 2018 6:22 am
by DJATOM
Also noticed some glitches with show=True
Re: VS mode cant open DVD
Posted: Fri May 04, 2018 6:36 am
by DJATOM
Managed to get some logs with VirtualDub2:
https://pastebin.com/BXcYbAp4
Re: VS mode cant open DVD
Posted: Fri May 04, 2018 8:59 am
by Morpheus
With show=True,both Preview(F5) and Benchmark(F7) MAY cause crashing.Sometime it works well.Sometime it crashes.
If it don't crash, some glitches exist.
The source is the bluray disk of Underworld.Extended.Cut.2003.
Re: VS mode cant open DVD
Posted: Fri May 04, 2018 9:04 am
by admin
Thanks, guys. I know what's wrong. Standby for fix...
Re: VS mode cant open DVD
Posted: Fri May 04, 2018 9:10 am
by admin
Please redownload dgdecnv2053_test.zip and update DGDecodeNV.dll; report results. Thank you.
Things for show=True were not initialized properly when show2 was absent.
Re: VS mode cant open DVD
Posted: Fri May 04, 2018 9:29 am
by DJATOM
No more crashes on my side.
Re: VS mode cant open DVD
Posted: Fri May 04, 2018 10:01 am
by Morpheus
The problem is solved.
Re: VS mode cant open DVD
Posted: Fri May 04, 2018 10:04 am
by admin
Thank you, gentlemen. I will release it now.