[RESOLVED] 4K HDR: failed to create video decoder on 43x.xx

Support forum for DGDecNV
Post Reply
User avatar
tormento
Posts: 252
Joined: Mon Sep 20, 2010 2:18 pm

[RESOLVED] 4K HDR: failed to create video decoder on 43x.xx

Post by tormento » Sun Jul 28, 2019 5:11 am

I am starting to deal with 4K material.

A friend of mine borrowed me his BD of Red sparrow, which is in 4k HDR format.

I have tried to feed the m2ts and mpls to DGIndexNV and it prompts with:

GPU decoder: Failed to create video decoder [801]. Exiting...

I have a 1060 card and, in theory, it should decode HEVC natively.

A small extract from mediainfo output:

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : HEVC
Format/Info : High Efficiency Video Coding
Format profile : Main 10@L5.1@High
HDR format : SMPTE ST 2086, HDR10 compatible
Codec ID : 36
Duration : 2 h 20 min
Bit rate : 49.4 Mb/s
Width : 3 840 pixels
Height : 2 160 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 (24000/1001) FPS
Color space : YUV
Chroma subsampling : 4:2:0 (Type 2)
Bit depth : 10 bits
Bits/(Pixel*Frame) : 0.249
Stream size : 48.4 GiB (86%)
Writing library : ATEME Titan File 3.8.14 (4.8.14.0)
Color range : Limited
Color primaries : BT.2020
Transfer characteristics : PQ
Matrix coefficients : BT.2020 non-constant
Mastering display color primaries : Display P3
Mastering display luminance : min: 0.0050 cd/m2, max: 1000 cd/m2

Any idea?
Last edited by tormento on Wed Aug 21, 2019 1:57 am, edited 2 times in total.

gonca
Posts: 763
Joined: Sun Apr 08, 2012 6:12 pm

Re: Red sparrow 4K HDR: failed to create video decoder

Post by gonca » Sun Jul 28, 2019 6:05 am

I have done a few 4K movies and never had that issue.
Try this
use MakeMKV to rip entire folder to HDD from original disc
Note any errors.
If no errors are present try DGIndexNV again, you might want to use the mpls file

User avatar
tormento
Posts: 252
Joined: Mon Sep 20, 2010 2:18 pm

Re: Red sparrow 4K HDR: failed to create video decoder

Post by tormento » Sun Jul 28, 2019 6:18 am

gonca wrote:
Sun Jul 28, 2019 6:05 am
If no errors are present try DGIndexNV again, you might want to use the mpls file
Mpls gives same error.

gonca
Posts: 763
Joined: Sun Apr 08, 2012 6:12 pm

Re: Red sparrow 4K HDR: failed to create video decoder

Post by gonca » Sun Jul 28, 2019 6:33 am

Did you try to redo it with MakeMKV yet?

User avatar
tormento
Posts: 252
Joined: Mon Sep 20, 2010 2:18 pm

Re: Red sparrow 4K HDR: failed to create video decoder

Post by tormento » Sun Jul 28, 2019 8:07 am

gonca wrote:
Sun Jul 28, 2019 6:33 am
Did you try to redo it with MakeMKV yet?
Yes, I wasn't importing m2ts or mpls directly from BD from the beginning.

I tried to rip to mkv too. Same error.

User avatar
admin
Site Admin
Posts: 4394
Joined: Thu Sep 09, 2010 3:08 pm

Re: Red sparrow 4K HDR: failed to create video decoder

Post by admin » Sun Jul 28, 2019 9:01 am

801 means "operation not supported on the current device". I don't know anything about the 1060 or whether it should support HW decoding of HEVC UHD HDR. I'll see what I can find about that. Meanwhile, does it fail on all such disks or just this one? Does it open other HEVC streams?

User avatar
admin
Site Admin
Posts: 4394
Joined: Thu Sep 09, 2010 3:08 pm

Re: Red sparrow 4K HDR: failed to create video decoder

Post by admin » Sun Jul 28, 2019 9:08 am


gonca
Posts: 763
Joined: Sun Apr 08, 2012 6:12 pm

Re: Red sparrow 4K HDR: failed to create video decoder

Post by gonca » Sun Jul 28, 2019 10:33 am

Didn't even occur to me, Win 8 minimum for hevc
Win 10 to be sure
Upgrade time

gonca
Posts: 763
Joined: Sun Apr 08, 2012 6:12 pm

Re: Red sparrow 4K HDR: failed to create video decoder

Post by gonca » Sun Jul 28, 2019 10:49 am

I thought manolito was the only one on old software and hardware platforms :P

User avatar
admin
Site Admin
Posts: 4394
Joined: Thu Sep 09, 2010 3:08 pm

Re: Red sparrow 4K HDR: failed to create video decoder

Post by admin » Sun Jul 28, 2019 11:07 am

tormento hasn't confirmed Win 7 yet. ;)

Post Reply