Rocky and Bullwinkle restoration challenge
- thechaoscoder
- Posts: 49
- Joined: Tue Jul 14, 2020 8:34 am
Rocky and Bullwinkle restoration challenge
Uploaded my version. For some reason the ftp connection breaks after 40-60mb. So I uploaded a txt with a dropbox link.
Out of laziness I just used: x264 --preset slower --crf 16 --tune animation.
I used some stabilization, but I wouldn't recommend it. It helps with some scenes, but overall it takes too much encoding time. It went from near real-time encoding speed to about 3fps. Quality wise there is not much difference.
Out of laziness I just used: x264 --preset slower --crf 16 --tune animation.
I used some stabilization, but I wouldn't recommend it. It helps with some scenes, but overall it takes too much encoding time. It went from near real-time encoding speed to about 3fps. Quality wise there is not much difference.
Rocky and Bullwinkle restoration challenge
Strange, must be on your side because it doesn't happen to me and I have had users upload 30GB a couple times (telescope data, OK?).thechaoscoder wrote: ↑Fri Jan 14, 2022 6:50 pmUploaded my version. For some reason the ftp connection breaks after 40-60mb. So I uploaded a txt with a dropbox link.
It's the script that is important.Out of laziness I just used: x264 --preset slower --crf 16 --tune animation.
Yeah, that's way too slow to be practical. Nevertheless, I didn't make any speed constraints, so I'll submit it as is and if your script wins I'll remove the stabilization.I used some stabilization, but I wouldn't recommend it. It helps with some scenes, but overall it takes too much encoding time. It went from near real-time encoding speed to about 3fps. Quality wise there is not much difference.
I'll post this challenge over at Doom9 also, as we have only three entries so far. Sorry, Sherman!
- thechaoscoder
- Posts: 49
- Joined: Tue Jul 14, 2020 8:34 am
Rocky and Bullwinkle restoration challenge
I used fireftp and now tried it with cyberduck again, but it's more or less the same. The progressbar jumps to 100% in like a second and then after some seconds it aborts...Strange, must be on your side because it doesn't happen to me and I have had users upload 30GB a couple times (telescope data, OK?).
What's telescope data?
Rocky and Bullwinkle restoration challenge
Data collected during telescopic observations.
BTW, I use FileZilla.
BTW, I use FileZilla.
Rocky and Bullwinkle restoration challenge
Just as an idea:
One could blur the hell out of it
but the flickering is still there,...
Cu Selur
One could blur the hell out of it
Code: Select all
# Imports
import os
import sys
import vapoursynth as vs
# getting Vapoursynth core
core = vs.core
# Import scripts folder
scriptPath = 'I:/Hybrid/64bit/vsscripts'
sys.path.insert(0, os.path.abspath(scriptPath))
# Loading Plugins
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/MiscFilter/MiscFilters/MiscFilters.dll")
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/GrainFilter/RemoveGrain/RemoveGrainVS.dll")
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/Support/libmvtools.dll")
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/Support/DePan.dll")
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/Support/temporalsoften.dll")
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/Support/scenechange.dll")
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/DeinterlaceFilter/TIVTC/libtivtc.dll")
core.std.LoadPlugin(path="I:/Hybrid/64bit/vsfilters/SourceFilter/d2vSource/d2vsource.dll")
# Import scripts
import lostfunc
# source: 'C:\Users\Selur\Desktop\rb.m2v'
# current color space: YUV420P8, bit depth: 8, resolution: 720x480, fps: 29.97, color matrix: 470bg, yuv luminance scale: limited, scanorder: telecine
# Loading C:\Users\Selur\Desktop\rb.m2v using D2VSource
clip = core.d2v.Source(input="E:/Temp/m2v_8d5fe18f80d41540b18869e0514a4efa_853323747.d2v")
# making sure input color matrix is set as 470bg
clip = core.resize.Bicubic(clip, matrix_in_s="470bg",range_s="limited")
# making sure frame rate is set to 29.970
clip = core.std.AssumeFPS(clip=clip, fpsnum=30000, fpsden=1001)
# Setting color range to TV (limited) range.
clip = core.std.SetFrameProp(clip=clip, prop="_ColorRange", intval=1)
# cutting from frame 24 to 263 - WARNING: This might cause synch issues
clip = core.std.Trim(clip=clip, first=24, last=263)
# Deinterlacing using TIVTC
clip = core.tivtc.TFM(clip=clip)
clip = core.tivtc.TDecimate(clip=clip)# new fps: 23.976
# make sure content is preceived as frame based
clip = core.std.SetFieldBased(clip, 0)
from vsdpir import DPIR
# adjusting color space from YUV420P8 to RGBS for vsDPIRDeblock
clip = core.resize.Bicubic(clip=clip, format=vs.RGBS, matrix_in_s="470bg", range_s="limited")
# deblocking using DPIRDeblock
clip = DPIR(clip=clip, strength=20.000, device_index=0, fp16=True)
# adjusting color space from RGBS to YUV444P16 for vsStab
clip = core.resize.Bicubic(clip=clip, format=vs.YUV444P16, matrix_s="470bg", range_s="limited")
# stabilizing using Stab
clip = lostfunc.Stab(clp=clip,mirror=0)
# set output frame rate to 23.976fps
clip = core.std.AssumeFPS(clip=clip, fpsnum=24000, fpsden=1001)
# Output
clip.set_output()
Cu Selur
- Attachments
-
- dpir_10sec.zip
- 10sec DPIR strength 20 sample
- (751.79 KiB) Downloaded 444 times
Rocky and Bullwinkle restoration challenge
chaoscoder's restoration looks really good but the whites are just about gone. Hope chaoscoder can look into the white balance and then we would have a real winner. Bright and vibrant, just like Bullwinkle!
- thechaoscoder
- Posts: 49
- Joined: Tue Jul 14, 2020 8:34 am
Rocky and Bullwinkle restoration challenge
I'll try something on the weekend ![Wink ;)](./images/smilies/icon_e_wink.gif)
![Wink ;)](./images/smilies/icon_e_wink.gif)
Rocky and Bullwinkle restoration challenge
I'm sure it's gonna be great. Really looking forward to it.
- thechaoscoder
- Posts: 49
- Joined: Tue Jul 14, 2020 8:34 am
Rocky and Bullwinkle restoration challenge
One problem is that some scenes look good while others need stronger settings, so finding a balance is not easy, but I think it's better overall. I tried to stay more on the conservative side and not overdo it. You can get a stronger effect if you remove overlay()
AutoAdjust is the only filter which does not uglify blends and fades.
I added this at the bottom of my script.
Test enc with same settings as before https://www.dropbox.com/s/n3js6mb1wke1z ... 3.mkv?dl=1
AutoAdjust is the only filter which does not uglify blends and fades.
I added this at the bottom of my script.
Code: Select all
core.avs.LoadPlugin(path=r'C:\AutoAdjust.dll')
core.avs.LoadPlugin(path=r'C:\DGDecodeNV.dll')
clip = core.avs.DGDenoise(clip, strength=0.04, blend=0.7) # remove some "dust" for a slightly cleaner look
adjust = clip.avs.AutoAdjust(
auto_gain=True,
high_quality = True,
#gamma_limit=1.15, gain_mode=0,
dark_limit = 1.14, bright_limit = 1.13,
avg_safety = 0.7,
auto_balance = True,
balance_str = 0.12,
temporal_radius = 22)
clip = haf.Overlay(clip, adjust, opacity=0.76)
Rocky and Bullwinkle restoration challenge
Thank you the thechaoscoder! I'll check it out today.
Rocky and Bullwinkle restoration challenge
Whites look much better. I could dance to that.
Rocky and Bullwinkle restoration challenge
thechaoscoder has won the challenge. Congratulations! We have sent an email to agree the method to send the prize.
All the submitters agreed that this submission was the best, so we dispensed with the poll.
Thank you to all who participated.
All the submitters agreed that this submission was the best, so we dispensed with the poll.
![Wink ;)](./images/smilies/icon_e_wink.gif)
Thank you to all who participated.