Feature Requests
Re: Feature Requests
i would like a 10/12/16 bit HDR->SDR...
More seriously, i also agree with gonca on the part "you choose" if finaly one feature request is not more asked than another.
My request was more for curiosity to see what it gives, than a real immediate needs.
Also, i'm sorry, it seems i've badly asked my question.
You choose one method among severals for HDR -> SDR.
Would you share the reason why you choose it ? Unless you've already done that in one of the posts of this 20 pages thread ?
More seriously, i also agree with gonca on the part "you choose" if finaly one feature request is not more asked than another.
My request was more for curiosity to see what it gives, than a real immediate needs.
Also, i'm sorry, it seems i've badly asked my question.
You choose one method among severals for HDR -> SDR.
Would you share the reason why you choose it ? Unless you've already done that in one of the posts of this 20 pages thread ?
Re: Feature Requests
I tested with the available Vapoursynth solutions and liked Reinhard best. It is also easy to implement and has some good literature representation. I have to start with something; that does not rule out adding other methods later. As there is no current Avisynth solution it would be good to get something usable out there.
As I mentioned earlier I am an incremental rather than a big-bang kind of person.
OK, gonna work on high-bit depth support for the utility filters.
As I mentioned earlier I am an incremental rather than a big-bang kind of person.
OK, gonna work on high-bit depth support for the utility filters.
Re: Feature Requests
This, at least 16 bit, as AviSynth+ 16 bit chain is almost complete. 10 bit as a necessary evil as h265 uses it in Main10 profile.
CUDA solution for HDR->SDR and possibly different dithering types even for bit depth decrease (at least none, ordered and floyd or bayer.
- High quality resizing (neural or any other hw possible thing)
- Temporal denoising (+ spatial, already existing)
- Make everything work as mtmode 2 in AVS+
Re: Feature Requests
Note sure if this of any use or interest https://developers.google.com/media/vp9/hdr-encoding/
under the heading
Convert SDR to HDR with a look-up table (LUT)
Converting HDR to SDR requires the transcoder to understand how to map brightness levels and colors to the smaller BT.709 color space and non-HDR range of brightness. For best results, an LUT describing how to perform that mapping -- usually specific to the content -- can be used. Examples C and D show how to use a LUT. We used bt2020_to_bt709_example.cube https://storage.googleapis.com/media.we ... ample.cube
Note: The LUT above is provided as an example of how to use an LUT with FFMpeg and is not optimized for the content in the example. LUTs are nearly always optimized for specific content.
I really do like it here.
Re: Feature Requests
Interesting, thanks!
Re: Feature Requests
Would you please add the duration HH:MM:SS on the right of resolution and fps? And yes, when setting start and end of project range, the duration of that too...
Re: Feature Requests
Add them where? Humor me, I'm getting on in years.
Re: Feature Requests
MT_NICE_FILTER will be better I think
As I understood from explanations and filter examples, programmer must care about memory allocations at getframe requests, not at the filter constructor. Mt mode 2 will care about safe memory allocation if filter allocates memory in the constructor, but it allocate, say, 4 times more memory with Prefetch(4). Imagine my double CPUs Xeon 2665 server running with 32 threads, so Prefetch(32) will eat a lot of RAM.
PC: RTX 2070 | Ryzen R9 5950X (no OC) | 64 GB RAM
Notebook: RTX 4060 | Ryzen R9 7945HX | 32 GB RAM
Notebook: RTX 4060 | Ryzen R9 7945HX | 32 GB RAM
Re: Feature Requests
OK, but maybe a status bar or something, not the window title. Lemme think...
Re: Feature Requests
While we are talking about interface. It would be nice to have something like this
in the status bar, while demuxing and saving project are running, i.e. visual feedback of progress.
in the status bar, while demuxing and saving project are running, i.e. visual feedback of progress.
Re: Feature Requests
You're a tough taskmaster. I'll see what I can do. How about a multiline title window?
Re: Feature Requests
Are you talking about duration? Never saw a multiline title window in my life. How is it possible?
Anyway, as most of us are using 16:9 screens, better to expand in lenght than in height.
Re: Feature Requests
Owner draw, of course. But I was being facetious.
There's already a cursor that runs along the timeline.
There's already a cursor that runs along the timeline.
Re: Feature Requests
I can't show the duration until after the project is saved. The entire stream must be parsed to count the frames. I do not use heuristics based on timestamps or anything like that, and anyway, elementary streams have no timestamps. So I could show the duration in the title bar after the project is saved or after a DGI file is loaded. It would be better, though, to show it on the Info dialog so that it gets placed in the log file. Showing the project range times would also be difficult for the same reason.
Is any of this any good to you?
Is any of this any good to you?
Re: Feature Requests
Sure but I want to have everything handled the same. It's one of my primary design goals!
Re: Feature Requests
Hi.
A lot of Work seems to have gone into demuxing MKV files with subtitles and everything.
Would the same thing be possible for M2TS files, or when opening an MPLS playlist?
Right now when I open an MPLS file and choose the demux menu, I only get the option for video and audio demuxing. No subs.
And the naming scheme of the files also seems to be limited. In the demux menu the lanuguage of the audio tracks are written. But after demux that info is gone, and you are left with 1100, 1101, 1102, 1103 and so on. You then have to have the demux menu open and rename the files manually.
If I open the MPLS in mkvmerge, and create a MKV file, and then load that MKV file into dgindex and choose the demux menu, then I get the option for video, audio, subs and chapters. And maybe even more. and the naming of files after demux, also contains the language of the track in the name.
Just seems like going accross the river to get some Water, to first have to create a MKV file, with the soul purpose of demuxing that, rather then using the MPLS file in dgindex directly.
Thanks in advance, and thanks for a great piece of software.
renols
A lot of Work seems to have gone into demuxing MKV files with subtitles and everything.
Would the same thing be possible for M2TS files, or when opening an MPLS playlist?
Right now when I open an MPLS file and choose the demux menu, I only get the option for video and audio demuxing. No subs.
And the naming scheme of the files also seems to be limited. In the demux menu the lanuguage of the audio tracks are written. But after demux that info is gone, and you are left with 1100, 1101, 1102, 1103 and so on. You then have to have the demux menu open and rename the files manually.
If I open the MPLS in mkvmerge, and create a MKV file, and then load that MKV file into dgindex and choose the demux menu, then I get the option for video, audio, subs and chapters. And maybe even more. and the naming of files after demux, also contains the language of the track in the name.
Just seems like going accross the river to get some Water, to first have to create a MKV file, with the soul purpose of demuxing that, rather then using the MPLS file in dgindex directly.
Thanks in advance, and thanks for a great piece of software.
renols
Re: Feature Requests
Sure, renols, the enhancements can be done for transport and program streams, and I have said that I will do it at some point. You're going to have to be a bit patient as I have a lot on my plate right now.
I can add the language to the demuxed filenames fairly easily. I'll do it but of course MEGUI users will hate me because the audio files won't be added to the main screen (until Zathor revises MEGUI).
I am an incremental not a big bang kind of guy.
I can add the language to the demuxed filenames fairly easily. I'll do it but of course MEGUI users will hate me because the audio files won't be added to the main screen (until Zathor revises MEGUI).
I am an incremental not a big bang kind of guy.
Re: Feature Requests
No problem. I didn't see that you mentioned that the enhancements would be addapted for other streams.
I will put on my "be patient" cap
renols