Binaries Update Notification Thread
Re: Binaries Update Notification Thread
Slipstream 174 for DGDecNV:
* Added new GPU definitions for Turing cards. Note that the format of the gpus.txt
file has changed, so do not try to use earlier versions of gpus.txt with the 174 binaries.
* Increased the packets timeout when looking for video in DGIndexNV.
* When opening a bluray MPLS, the chapters file is now generated when Save Project
is performed and the chapters file is generated in the same directory as the DGI file. [tormento]
* Updated the DGIndexNV user manual.
* Added new GPU definitions for Turing cards. Note that the format of the gpus.txt
file has changed, so do not try to use earlier versions of gpus.txt with the 174 binaries.
* Increased the packets timeout when looking for video in DGIndexNV.
* When opening a bluray MPLS, the chapters file is now generated when Save Project
is performed and the chapters file is generated in the same directory as the DGI file. [tormento]
* Updated the DGIndexNV user manual.
Re: Binaries Update Notification Thread
Slipstream 175 for DGDecNV:
* Fixed a regression in build 174. When opening an MPLS and following Save Project,
video was left in an undefined state, causing an error popup when trying to preview. [Boulder]
* Fixed a regression in build 174. When opening an MPLS and following Save Project,
video was left in an undefined state, causing an error popup when trying to preview. [Boulder]
Re: Binaries Update Notification Thread
Slipstream 176 for DGDecNV:
* When demuxing a TrueHD stream from a transport stream, also generate a separate
demuxed AC3 file for the embedded AC3 stream (if it exists). [renols]
* Updated the DGIndexNV user manual for the description of the CLI -a option.
* When demuxing a TrueHD stream from a transport stream, also generate a separate
demuxed AC3 file for the embedded AC3 stream (if it exists). [renols]
* Updated the DGIndexNV user manual for the description of the CLI -a option.
Re: Binaries Update Notification Thread
Slipstream 177 for DGDecNV:
* Demuxing PGS subs from multiple M2TS was broken (the time was reset to 0 at each
subsequent M2TS file). The fix provided seems to work fine, but it may not be
the final solution, pending user feedback. It's definitely better than resetting to 0
for each M2TS file.
[renols]
* Demuxing PGS subs from multiple M2TS was broken (the time was reset to 0 at each
subsequent M2TS file). The fix provided seems to work fine, but it may not be
the final solution, pending user feedback. It's definitely better than resetting to 0
for each M2TS file.

Re: Binaries Update Notification Thread
DGHDRtoSDR 1.12:
* Replaced the sat parameter with separate r, g, b parameters. The default for b is 1.15 to
correct blue desaturation due to the gamut mapping used.
* Filter parameter defaults have changed. Refer to the .txt file.
* Set the Vapoursynth properties for 709 after conversion.
* Updated the .txt file.
http://rationalqm.us/hdr
* Replaced the sat parameter with separate r, g, b parameters. The default for b is 1.15 to
correct blue desaturation due to the gamut mapping used.
* Filter parameter defaults have changed. Refer to the .txt file.
* Set the Vapoursynth properties for 709 after conversion.
* Updated the .txt file.
http://rationalqm.us/hdr
Re: Binaries Update Notification Thread
DGDecNV slipstream 178:
* Fixed video demuxing from MPLS stream via CLI -od parameter. [dmcs]
* Fixed video demuxing from MPLS stream via CLI -od parameter. [dmcs]
DGDecNV slipstream 179
DGDecNV slipstream 179:
* Added a new option to set the default path for Save Project. Refer to the DGIndexNV
user manual for details. [sparktank]
* Fixed loss of the last frame from MP4 container streams. [ChaosKing]
* Added a new option to set the default path for Save Project. Refer to the DGIndexNV
user manual for details. [sparktank]
* Fixed loss of the last frame from MP4 container streams. [ChaosKing]
Re: Binaries Update Notification Thread
DGDecNV slipstream 180:
* After Save Project the navigation cursor now stays where it was instead of jumping to position 0. [flyordie]
* Fixed Load Project for MKV/MP4 (the saved project range was previously not restored). [flyordie]
* Converted several fatal error popups to auto-dismiss (after 5 seconds) for CLI batch operation. [ChaosKing]
* After Save Project the navigation cursor now stays where it was instead of jumping to position 0. [flyordie]
* Fixed Load Project for MKV/MP4 (the saved project range was previously not restored). [flyordie]
* Converted several fatal error popups to auto-dismiss (after 5 seconds) for CLI batch operation. [ChaosKing]
Re: Binaries Update Notification Thread
DGDecNV slipstream 181:
* Fixed CLI -at option to not depend on the GUI setting for "Enable template". [renols]
* Brought back the DELAY value in the demuxed filenames. [Xunkar]
* Revised DGIndexNV user manual to add an Appendix F describing audio delay reporting notes.
* Fixed CLI -at option to not depend on the GUI setting for "Enable template". [renols]
* Brought back the DELAY value in the demuxed filenames. [Xunkar]
* Revised DGIndexNV user manual to add an Appendix F describing audio delay reporting notes.
Re: Binaries Update Notification Thread
DGDecNV slipstream 182:
* Fixed regression in MP4 handling (crash on open) introduced in 179->180.
* Fixed regression in MP4 handling (crash on open) introduced in 179->180.